单项选择题
A. Send monitored traffic to a VLAN B. Send monitored traffic to a remote VEM over L2 C. Receive monitored traffic on a vEthernet interface D. Send monitored traffic to an IP destination
WhichstatementsarevalidforalocalSPANconfiguration？（）A. ...
多项选择题Which statements are valid for a local SPAN configuration？ （）
A. Source and destination interface must be on the same host B. Source and destination interfaces can be on different hosts C. Destination vEthernet interface can be on a different VLAN than the source D. Destination interface can be a physical port E. Destination interface cannot be a physical port
Given a host with two NICs assigned to a N1k profile，wh...
多项选择题
Given a host with two NICs assigned to a N1k profile，which topologies are suitable for this type of configuration （） port-profile type Ethernet name VM-Data vmware port-group switchport mode trunk switchport allowed vlan 400-410 channel-group auto mode active no shut state enabled
A. Cisco UCS fabric interconnects B. Pair of N5K’s in VPC C. Standalone N5K D. Pair of N5K’s in non-VPC E. Cisco Catalyst 6000 Switch in VSS
A customer would like to monitor traffic that is being ...
A customer would like to monitor traffic that is being sent to a specific virtual machine named VM001 using SPAN. The customer has another virtual machine configured as a sniffer host called VM002. What configuration is required， and what other changes will need to be made？ （） VSM-PRI-188# sh int vethernet 5 Vethernet5 is up Port description is VM001， Network Adapter 2 HardwarE. Virtual， address： 0050.56b0.001e （bia 0050.56b0.001e） Owner is VM "VM001"， adapter is Network Adapter 2 Active on module 5 VMware DVS port 484 Port-Profile is VM-vlan-10 Port mode is access VSM-PRI-188# sh int vethernet 6 Vethernet6 is up Port description is VM002， Network Adapter 1 HardwarE. Virtual， address： 0050.56b0.0020 （bia 0050.56b0.0020） Owner is VM "VM002"， adapter is Network Adapter 1 Active on module 5 VMware DVS port 485 Port-Profile is VM-vlan-10 Port mode is access
A. Monitor session 1 type span Source interface veth5 both Destination interface veth6 No shut B. monitor session 1 source vlan 10 destination interface veth6 no shut C. monitor session 1 type er-span source interface vlan 10 destination ip 10.1.1.10 no shut D. VM002 must be removed from the Nk1V E. Move VM002 to Module 5 F. Restart the VEM on module 5
