单项选择题

Sub-cooling is a method of reducing the temperature of the liquid refrigerant below its （）.

A.freezing point
B.floc point
C.condensing temperature
D.compression temperature

相关考题

If a bilge pump is able to develop vacuum, but is unabl...

单项选择题If a bilge pump is able to develop vacuum, but is unable to sufficiently pump out the bilges, you would check for all of the following EXCEPT （）.

A.the circuit breaker
B.for leaks in the suction piping
C.relief valve is not properly seated
D.the suction strainer

The principal purpose of sub-cooling liquid refrigerant...

单项选择题The principal purpose of sub-cooling liquid refrigerant prior to its entering the expansion valve is to （）.

A.increase the refrigerating effect, by decreasing the amount of flash gas
B.allow the refrigerant to enter the throttling device in a saturated condition
C.increase the refrigerating effect by increasing the amount of flash gas
D.minimize the temperature drop of the liquid as it passes through the solenoid valve to the outlet side

Refrigerant is normally sub-cooled in a refrigeration o...

单项选择题Refrigerant is normally sub-cooled in a refrigeration or air conditioning system condenser to （）.

A.maintain adequate coil back pressure
B.prohibit flashing in the liquid line
C.reduce refrigerant volume in the system
D.reduce compressor discharge line loading

船舶辅助机械

Sub-cooling is a method of reducing the temperature of the liquid refrigerant below its （）.