MCP(70-210)

单项选择题

You are installing Windows 2000 Professional on 100 MPS compliant computers. You have created an image of this computer and copied the image to two test computers， which have two processors installed on them. When you run the test computers， you find out that the second processor on both the computers is not being used. What should you do to enable the second processor？（）

A.On your original machine use Device Manager\Computer\Properties\Drivers\Update Driver to install the correct multiprocessor HAL.
B.On the original computer, through the Add New Hardware, select the processor from the device list and install the required processor.
C.Download the patch from the motherboard manufacturer to allow the configuration of dual processors.
D.Reinstall Windows 2000 Professional on both the test computers.

相关考题

You have a computer running Windows 2000 Professional. ...

单项选择题

You have a computer running Windows 2000 Professional. You have purchased a new USB scanner. You attached it to the USB port. Then you go to device manager to see the status of the USB port. The status of the USB port is shown below.

What should you do to resolve this problem?()

A.Update the scanner drivers using certified drivers
B.Enable the USB port in the computers BIOS.
C.Contact the maker or vendor for you system and obtain the current version of BIOS.
D.Enable the USB hub controller in device manager.

YouhaveacomputerrunningWindows2000Professional.Youhavep...

单项选择题You have a computer running Windows 2000 Professional. You have purchased a new USB scanner. You attached it to the USB port. When you go to device manager to see the status of the USB port， you find a USB controller there but with a yellow warning icon next to the host controller name. What should you do to resolve this problem？（）

A.Update the scanner drivers using certified drivers
B.Enable the USB port in the computers BIOS again.
C.Contact the maker or vendor for you system and obtain the current version of BIOS.
D.Enable the USB hub controller in device manager.

YouhaveacomputerrunningWindows2000Professional.Youhavep...

单项选择题You have a computer running Windows 2000 Professional. You have purchased a new USB scanner. You attached it to the USB port. When you go to device manager to see the status of the USB port， You did not find any USB controller there. You then reboot your system and go to system BIOS settings and enable the USB Controller. But it is still missing. What should you do to resolve this problem？（）

A.Update the scanner drivers using certified drivers
B.Enable the USB port in the computers BIOS again.
C.Contact the maker or vendor for you system and obtain the current version of BIOS.
D.Enable the USB hub controller in device manager.
E.Reinstall the USB device driver and disable the USB error detection

All Rights Reserved 版权所有©牛牛题库网(nntiku.com)

备案号：湘ICP备2022003000号-1