单项选择题

This question is about the formation of OSPF adjacency. An OSPF adjacency will not form correctly across a point-to-point link in the same area. Which would most likely cause this problem？（）

A.Each interface has a different OSPF cost.
B.Each interface is configured with secondary addresses as well as primary addresses.
C.Each interface has a different MTU size.
D.Each interface is configured with theip unnumbered loopback 0 command.

相关考题

WhatisNBAR？

问答题What is NBAR？

Refer to the exhibit. Router E learned about the PIM RP...

单项选择题

Refer to the exhibit. Router E learned about the PIM RP （designated as 7.7.7.7） from four different sources. Routers A and D advertised the 7.0.0.0 network via EIGRP. Routers B and C advertised the 7.0.0.0 network via OSPF. Considering that all four Ethernet interfaces on router E could potentially lead back to the PIM-RP， when router E receives the first multicast packet down the shared tree， which incoming interface will be used to successfully pass the RPF check？（）

A.E0
B.E1
C.E2
D.E3
E.None of these interfaces will be used to successfully pass the RPF check
F.All of these interfaces would successfully pass the RPF check

On the basis of the network provided in the exhibit， al...

单项选择题

On the basis of the network provided in the exhibit， all routers are configured to run EIGRP on all links. If the link between PG-R1 and PG-R2 fails， what is the maximum number of queries PG-R3 will receive for 192.168.1.0/24， assuming that all the packets sent during convergence are transmitted once （there are no dropped or retransmitted packets）？（）

A.PG-R3 will receive up to four queries for 192.168.1.0/24， one each from PG-R2， PG-R4， PGR5，and PG-R6.
B.PG-R3 will receive up eight queries for 192.168.1.0/24， one from PG-R2， two from PG-R4，three from PG-R5， and four from PG-R6.
C.PG-R3 will receive one query for 192.168.1.0/24， since the remote routers， PG-R4， PG-R5， and PG-R6， are natural stubs in EIGRP
D.PG-R3 will not receive any queries from PG-R2， because there are no alternate paths for 192.168.1.0/24.

CCIE系列认证综合练习

This question is about the formation of OSPF adjacency. An OSPF adjacency will not form correctly across a point-to-point link in the same area. Which would most likely cause this problem？（）