单项选择题

What is the use of ERSPAN on N1kv？（）

A. Send monitored traffic to a VLAN
B. Send monitored traffic to a remote VEM over L2
C. Receive monitored traffic on a vEthernet interface
D. Send monitored traffic to an IP destination

点击查看答案

上一题目录下一题

相关考题

多项选择题

Which statements are valid for a local SPAN configuration？（）

A. Source and destination interface must be on the same host
B. Source and destination interfaces can be on different hosts
C. Destination vEthernet interface can be on a different VLAN than the source
D. Destination interface can be a physical port
E. Destination interface cannot be a physical port

多项选择题

Given a host with two NICs assigned to a N1k profile，which topologies are suitable for this type of configuration （）
port-profile type Ethernet name VM-Data
vmware port-group
switchport mode trunk
switchport allowed vlan 400-410
channel-group auto mode active
no shut
state enabled

A. Cisco UCS fabric interconnects
B. Pair of N5K’s in VPC
C. Standalone N5K
D. Pair of N5K’s in non-VPC
E. Cisco Catalyst 6000 Switch in VSS

多项选择题

A customer would like to monitor traffic that is being sent to a specific virtual machine named VM001 using SPAN. The customer has another virtual machine configured as a sniffer host called VM002. What configuration is required， and what other changes will need to be made？（）
VSM-PRI-188# sh int vethernet 5
Vethernet5 is up
Port description is VM001， Network Adapter 2

HardwarE. Virtual， address： 0050.56b0.001e （bia 0050.56b0.001e）
Owner is VM "VM001"， adapter is Network Adapter 2
Active on module 5
VMware DVS port 484
Port-Profile is VM-vlan-10
Port mode is access

VSM-PRI-188# sh int vethernet 6
Vethernet6 is up
Port description is VM002， Network Adapter 1
HardwarE. Virtual， address： 0050.56b0.0020 （bia 0050.56b0.0020）
Owner is VM "VM002"， adapter is Network Adapter 1
Active on module 5
VMware DVS port 485
Port-Profile is VM-vlan-10
Port mode is access

A. Monitor session 1 type span       Source interface veth5 both      Destination interface veth6      No shut
B. monitor session 1     source vlan 10      destination interface veth6      no shut
C. monitor session 1 type er-span      source interface vlan 10      destination ip 10.1.1.10      no shut
D. VM002 must be removed from the Nk1V
E. Move VM002 to Module 5
F. Restart the VEM on module 5