多项选择题

All of the routers in the network are configured with the ip subnet-zero command. Which network addresses should be used for Link A and Network A (Choose two.)（）。

A.Network A - 172.16.3.48/26
B.Network A - 172.16.3.128/25
C.Network A - 172.16.3.192/26
D.Link A - 172.16.3.0/30
E.Link A - 172.16.3.40/30
F.Link A - 172.16.3.112/30

点击查看答案&解析

上一题目录下一题

相关考题

多项选择题

The switches shown in the diagram, Core and Core2, are both Catalyst 2950s. The addressing scheme for each company site is as follows:Router Ethernet port - 1st usable addressCore - 2nd usable addressCore2 - 3rd usable addressFor this network, which of the following commands must be configured on Core2 to allow it to be managed remotely from any subnet on the network? （）

A.Core2(config)# interface f0/0 Core2(config-if)# ip address 192.168.1.10 255.255.255.248
B.Core2(config)# interface vlan 1 Core2(config-if)# ip address 192.168.1.11 255.255.255.248
C.Core2(config)# line con 0 Core2(config-line)# password cisco
D.Core2(config)# line vty 0 4 Core2(config-line)# password cisco
E.Core2(config)# ip default-gateway 192.168.1.9
F.Core2(config)# ip route 0.0.0.0 0.0.0.0 192.168.1.8

单项选择题

Which type of EIGRP route entry describes a fesible successor？（）

A.a primary route，stored in the routing table
B.a backup route，stored in the routingt able
C.a backup route，stored in the topology table
D.A primary route，stored in the topology table

单项选择题

无类路由协议路由表表目为三维组，其中不包括（）。

A.子网掩码
B.源网络地址
C.目的网络地址
D.下一跳地址