You have a server named Server1 that runs Windows Server 2012 R2.
Server1 has three physical network adapters named NIC1, NIC2, and NIC3.
On Server1, you create a NIC team named Team1 by using NIC1 and NIC2. You configure Team1 to accept network traffic on VLAN 10.
You need to ensure that Server1 can accept network traffic on VLAN 10 and VLAN 11. The solution must ensure that the network traffic can be received on both VLANs if a network adapter fails.
What should you do?（）

Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1. Server1 runs Windows Server 2012 R2.
You need to create a 3-TB virtual hard disk (VHD) on Server1.
Which tool should you use?（）

You have a server named Server1.Server1 runs Windows Server 2012 R2.
Server1 has two network adapters. Each network adapter must be configured as shown in the following table.

You need to configure the correct IPv6 address prefix for each network adapter.
Which prefix should you select for each network adapter?
To answer, drag the appropriate IPv6 prefix to the correct network adapter in the answer area.
Each prefix may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.

You plan to deploy a DHCP server that will support four subnets. The subnets will be configured as shown in the following table.

You need to identify which network ID you should use for each subnet.
What should you identify?
To answer, drag the appropriate network ID to the each subnet in the answer area.