Network topology Exhibit： 

You work as a network engineer for. You are required to set up the network being displayed in the network topology exhibit through the console using IOS commands.

Each of these vlans has one host each on its port SVI on vlan 1 - ip 192.168.1.11 with snm Switch B - 
Ports 3， 4 connected to ports 3 and 4 on Switch A 
Port 15 connected to Port on Router. 
Tasks to do 
1. Use non proprietary mode of aggregation with Switch B being the initiator -- Assumed use LACP with B being in Active mode 
2. Use non proprietary trunking and no negotiation -- Assumed use switchport mode trunk and switchport trunk encapsulation dot1q 
3. Restrict only to vlans needed 
-- Assumed either vtp pruning or allowed vlan list. vtp pruning command did not seem to work on the simulator so landed using allowed vlan list 
4. SVI on vlan 1 with some ip and subnet given 
5. Configure switch A so that nodes other side of Router C are accessible -- Assumed this to mean that on switch A default gatway has to be configured. 
6. Make switch B the root 
-- Could not get this to work. Exam hung when I tried the command spanning-tree vlan 1，21-23 priority 4096
 

Configure the Multilayer Switch so that PCs from VLAN 2 and VLAN 3 can communicate with the Server.