单项选择题

Which configuration would make an IP SLA probe use a precedence value of 5？（）

A.ip sla 1 icmp-echo 1.1.1.1 tos 160
B.ip sla 1 icmp-echo 1.1.1.1 tos 20
C.ip sla 1 icmp-echo 1.1.1.1 precedence 5
D.ip sla 1 icmp-echo 1.1.1.1 dscp 20

点击查看答案

上一题目录下一题

相关考题

单项选择题

You are the network administrator of an enterprise company that just deployed a global IP telephonyenvironment. In order to guarantee good voice quality，you asked your provider to implement QoS on the CE routers of your MPLS network. On your LAN，you have also deployed QoS.Users，however，keep complaining about bad voice quality，and the provider does not see matches on the DSCP values that you have asked him to match upon. What is most likely the problem？（）

A.The phones are not sending traffic with the correct DSCP value.
B.The Cisco CallManager is not marking the traffic correctly.
C.This is most likely a bug on the CE routers.
D.Your LAN QoS is incorrectly configured.

单项选择题

You are the network administrator of a Layer 3 switched network. Users in one VLAN are complaining thataccess to the server VLAN is very slow from time to time. Traffic in the local VLAN works without any issue，and users in other VLANs do not have any complaint to reach the server VLAN. What is most likely thecause of this issue？（）

A.routing issue
B.denial-of-service attack
C.MAC flooding
D.spanning-tree recalculation
E.Layer 2 loop
F.ARP spoofing attack

单项选择题

You are deploying two core switches， one in each building， 50 km away from each other. The cross-connection between them will be a Layer 2 2-gigabit EtherChannel with an 802.1Q trunk. You configured it correctly but the link does not come up. The port is in the "admin up" state， and the line protocol is in the "down" state. The fiber link is OK. What would be the most likely reason for the link not to come up？（）

A. The switches are not the same model
B. You are not using the correct SFP
C. You are not using correct optical media converters
D. Configuration should be modified， because the distance is longer