单项选择题

Which of the following steps does a customer use to upgrade the firmware on the AMM to the latest level?（）

A.Open a Web browser and log on to the IMM; in the navigation frame, click IMM Firmware Update under IMM Control; click Browse; select the .exe file; click the Upgrade/Update button
B.TFTP to the AMM; from the Main Menu, select Update; browse to the downloaded .exe file
C.Telnet to AMM; from the Main Menu, select Update; browse to the downloaded .pkt file
D.Open a Web browser and log on to the AMM; in the navigation frame, click AMM Firmware Update under AMM Control; click Browse; select the .pkt file; click the Upgrade/Update button

点击查看答案

上一题目录下一题

相关考题

单项选择题

In which phase should a TDA be performed?（）

A.Server deployment
B.Installation and server configuration
C.Problem determination/resolution
D.Needs analysis and design

单项选择题

An IBM System x Technical Expert has a prospective customer who is very excited about X5 and they are working on configurations. During the process the customer has changed the design numerous times and has significantly increased the scope. They recently selected a Business Partner who has been involved in the last few design changes. What steps should be taken to make sure the customer is satisfied with the solution?（）

A.Turn over current design to Techline to create configurations
B.Perform knowledge transfer of design requirements to Business Partner then disengage
C.Work with business partner to engage Techline to assist with configurations and request Technical and Delivery Assessment (TDA)
D.Work with business partner to engage Techline to create configurations

单项选择题

A banking customer has two Ethernet Switch Modules installed in an IBM BCE chassis. The modules were configured identically. The Ethernet module in bay 1 was accidentally reset to factory defaults. Which solution returns the module to the customer-specific configuration? （）

A.Restore the configuration from NVRAM using the Switch Module Web interface
B.Back up the configuration of the Ethernet module in bay 1 and restore it to the Ethernet module in bay 2 using the AMM
C.Swap the modules, which will automatically resynch the settings stored in the Advanced Management Module
D.Back up the configuration from Ethernet module in bay 2 and restore it to the module in Bay 1 using the switch CLI or Web interface